Upgrade x (Solaris + SqueezeCenter)

Here’s a quick way to upgrade one or both Solaris (tested with Nevada snv_107) and SqueezeCenter (tested with SC 7.4 24827).

  1. Remove the CPAN directory in the SC root directory
    # mv CPAN CPAN.orig
  2. Install missing CPAN modules
    # perl -MCPAN -e shell
    cpan> install Bundle::CPAN
    . . .
    cpan> reload CPAN
    cpan> install I18N::LangTags
    cpan> force install Scalar::Util
  3. Disable Encode::Detect::Detector module in Slim/Utils/Unicode.pm (line 40). The module can’t be compiled for Solaris.
    # vi Slim/Utils/Unicode.pm
    . . .
    #use Encode::Detect::Detector;

SqueezeCenter again. Testing v7.3

SqueezeCenter 7.2 is officially out and not interesting anymore 😉 Let’s have a look at version 7.3 which has a new streaming service. In this test I downloaded SqueezeCenter-7.3-22975.ZIP from here.

The first attempt to start the server (after unpacking and “chmod“-ding) gave me this error:

# ./slimserver.pl
The following modules failed to load: YAML::Syck

To download and compile them, please run: /usr/local/SqueezeCenter-7.3-22975/Bin/build-perl-modules.pl YAML::Syck


The “built-in” build-perl-modules.pl failed to install the CPAN module:

# /usr/local/SqueezeCenter-7.3-22975/Bin/build-perl-modules.pl YAML::Syck
Welcome to the Slim Devices perl module installer.

These packages are needed for SqueezeCenter to function.
You will need a C compiler (gcc), make, and perl installed.

You will need development libraries for MySQL. eg: libmysqlclient

You will need development libraries for expat. eg: libexpat1-dev

*** Ignore any warnings about AppConfig. ***

Please enter a perl binary to use (defaults to /usr/bin/perl)
This must be the same perl binary that you ran this program with –>
Please enter a directory to download files to –>
Downloads will use lwp to fetch tarballs.

Downloading YAML-Syck-0.64.tar.gz to: /usr/local/SqueezeCenter-7.3-22975
Something looks wrong – I couldn’t read /usr/local/SqueezeCenter-7.3-22975/YAML-Syck-0.64.tar.gz, which I just downloaded.
sh: YAML-Syck-0.64.tar.gz: cannot open
tar: blocksize = 0
Couldn’t change to YAML-Syck-0.64 : No such file or directory at /usr/local/SqueezeCenter-7.3-22975/Bin/build-perl-modules.pl line 226, line 2.

So, I decided to go the old way and get rid of the supplied with SqueezeCenter CPAN directory.

# mv CPAN CPAN-orig

… update YAML::Syck just in case…

# perl -MCPAN -e shell
. . .
cpan[1]> install YAML::Syck
YAML::Syck is up to date (1.05).

… and start the server again …

# ./slimserver.pl
Can’t locate Encode/Detect/Detector.pm in @INC (@INC contains: /usr/local/SqueezeCenter-7.3-22975/CPAN/arch/5.8/i86pc-solaris-64int /opt/csw/SqueezeCenter-7.3-22975/CPAN/arch/5.8/i86pc-solaris-64int/auto /usr/local/SqueezeCenter-7.3-22975/CPAN/arch/5.8.4/i86pc-solaris-64int /usr/local/SqueezeCenter-7.3-22975/CPAN/arch/5.8.4/i86pc-solaris-64int/auto /usr/local/SqueezeCenter-7.3-22975/CPAN/arch/5.8/i86pc-solaris-64int /usr/local/SqueezeCenter-7.3-22975/CPAN/arch/5.8/i86pc-solaris-64int/auto /usr/local/SqueezeCenter-7.3-22975/CPAN/arch/i86pc-solaris-64int /usr/local/SqueezeCenter-7.3-22975/lib /usr/local/SqueezeCenter-7.3-22975/CPAN /usr/local/SqueezeCenter-7.3-22975 /usr/local/SqueezeCenter-7.3-22975 /usr/perl5/5.8.4/lib/i86pc-solaris-64int /usr/perl5/5.8.4/lib /usr/perl5/site_perl/5.8.4/i86pc-solaris-64int /usr/perl5/site_perl/5.8.4 /usr/perl5/site_perl /usr/perl5/vendor_perl/5.8.4/i86pc-solaris-64int /usr/perl5/vendor_perl/5.8.4 /usr/perl5/vendor_perl .) at /usr/local/SqueezeCenter-7.3-22975/Slim/Utils/Unicode.pm line 40.
BEGIN failed–compilation aborted at /usr/local/SqueezeCenter-7.3-22975/Slim/Utils/Unicode.pm line 40.
Compilation failed in require at /usr/local/SqueezeCenter-7.3-22975/Slim/Utils/Prefs/Namespace.pm line 30.
BEGIN failed–compilation aborted at /usr/local/SqueezeCenter-7.3-22975/Slim/Utils/Prefs/Namespace.pm line 30.
Compilation failed in require at /usr/local/SqueezeCenter-7.3-22975/Slim/Utils/Prefs.pm line 81.
BEGIN failed–compilation aborted at /usr/local/SqueezeCenter-7.3-22975/Slim/Utils/Prefs.pm line 81.
Compilation failed in require at /usr/local/slimserver/slimserver.pl line 146.
BEGIN failed–compilation aborted at /usr/local/slimserver/slimserver.pl line 146.

This error looks familiar. And after commenting line 40 in SqueezeCenter-7.3-22975/Slim/Utils/Unicode.pm (#use Encode::Detect::Detector; ) the server came alive and immediately updated the firmware of the Transporter to version 62.

SqueezeCenter and Compress::Zlib

After upgrading to Nevada b92 SqueezeCenter refused to start with the following error:

The following modules failed to load: Compress::Zlib

# perl -MCPAN -e shell
cpan> install Compress::Zlib
. . .
Module [Compress::Zlib] failed to load: is only available with the XS version
. . .

But the actual problem is Scalar::Util. To solve the problem reinstall Scalar::Util and then Compress::Zlib. Use force install if CPAN says that the latest version is already installed:

# perl -MCPAN -e shell
. . .
cpan[1]> install Scalar::Util
CPAN: Storable loaded ok (v2.12)
Going to read /var/tmp/cpan/Metadata
Database was generated on Tue, 24 Jun 2008 10:02:57 GMT
Scalar::Util is up to date (1.19).
cpan[2]> force install Scalar::Util
. . .
cpan[3]> force install Compress::Zlib
. . .

Sources: whirlpool.net.au and Usenet forums.